Anti-Corrosion Coatings for Glove Boxes
Anti-Corrosion Coatings
Aims
- Protecting the surface or volume (glove box, transfer chamber, drying oven…) against any corrosion from using acids, solvants or aggressive chemicals.
- Risk control and preventing from an accidental gaseous reaction.
- Increasing the surface resistance through a specific coating
Available coatings
- HALAR ®
- TEFLON ®
- Other on request
- Technical advice according process and conditions (temperature, concentration, form, frequency…)
technical Specifications
technical Specifications of anti-corrosion coatings:
Coatings fitting exclusively on stainless steels.
|
HALAR ®: thermoplastic coating based on ECTFE fluoropolymer
|
TEFLON ®: thermoplastic coating based on PTFE fluoropolymer
|
Coating solutions fitting for bottom and inner sides of glove boxes, accessories mounted into the working area, stainless steel transfer chambers,
|
vacuum drying oven or any specific part attached to the project.
|
Compatibility
This equipment can be installed on the following glove box models
Contact Us
* Required fields