Door lever O-ring Ø220
Overview
Door lever O-ring Ø220
Description
The lever door seals are mounted on the shutter (lever doors) used to close a glove ring. The seals can be used from the inside or outside of a glove box depending on its use and the protection desired. Seals can be used, depending on the case and application, for the secure replacement of a used glove or to limit the permeation of a glove in a purified glove box volume. A lever door seal must always be slightly greased (vacuum grease) and replaced if it turns out to be defective. A joint in poor condition can harm the proper functioning of the door and potentially call into question the safety of the installation or the current manipulations.
Technical specifications - Information
|
Joints sold in pairs or bundles.
|
|
Used to reinforce gloves attached to glove rings of 220 mm interior diameter.
|
Have a project?
Our experts will provide you with an answer adapted to your needs as soon as possible.
Equipment and Features
See our related products
Contact form
Need help or an offer? Contact us